Size relationships in a design that serves as a transparent underlying structure is called:
d.
Proportion
Correct Answer
Step-by-Step AI Explanation
Verified Method
Proportion refers to the size relationships among parts of a design, i.e., how elements relate to one another in scale.
Number of bits per second (bps) that can be sent from one digital device to another is called:
Step-by-Step AI Explanation
Verified Method
Baud is the signaling rate; in the paper's intended usage, it is the term given for the transmission rate of bits per second.
The position and space given to the placement of elements in a composition is called:
Step-by-Step AI Explanation
Verified Method
Proximity is the design principle dealing with the placement of elements and the space between them in a composition.
A6 size in millimeters is:
Step-by-Step AI Explanation
Verified Method
The ISO A6 paper size is $105\times148$ mm.
Achromatic gray is _____.
a.
A mix of black and white
Correct Answer
b.
A mix of cyan and white
c.
Cyan, magenta and yellow
Step-by-Step AI Explanation
Verified Method
Achromatic colors have no hue; gray is produced by mixing black and white, or by neutral mixtures lacking chroma.
American newspaper format in millimeters is:
Step-by-Step AI Explanation
Verified Method
The printed answer key marks $420 \times 578$ mm as the American newspaper format.
The type faces that refer handwriting are called:
Step-by-Step AI Explanation
Verified Method
Script typefaces imitate handwriting or calligraphic forms.
The process of making sure that copy will fit the space allotted for it is called as ________.
b.
Copy fitting
Correct Answer
Step-by-Step AI Explanation
Verified Method
Copy fitting is the editorial/typesetting process of adjusting text so it fits the assigned space.
The average number of times an audience has an opportunity to be exposed to a media vehicle is called:
d.
Average Frequency
Correct Answer
Step-by-Step AI Explanation
Verified Method
Average frequency is the standard term for how many times, on average, an audience is exposed to a media vehicle.
LPI (Lines Per Inch) is a measurement of:
c.
Screen ruling
Correct Answer
Step-by-Step AI Explanation
Verified Method
LPI refers to screen ruling, the number of halftone lines per inch used in printing.
Sign up free in seconds to unlock step-by-step AI answers for the remaining 140 questions.
_____ is the term used to describe an image which has been mirror reversed.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The conversion process for interpreting Postscripts to bitmaps is called:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
To arrange the pages of a publication before printing in a sequence which will ensure continuity when a sheet is folded is called _____.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
DCS (a file format), also often referred to as EPS5, stands for:
a.
Desktop colour separations
b.
Document colour separations
c.
Document colour services
d.
Digital character specifications
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The prevailing influence of one element in a layout over another is called:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Continuous tone full colour in CMYK represents an image reproduced to a bit depth of:
a.
32 bits (Cx8, Mx8, Yx8, Kx8)
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
_____ graphics help people find their way through architectural spaces.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Which of the following statement about baking of lithographic plates is not true?
a.
Becomes more resistant to mechanical wear and tear.
b.
Becomes more resistant to cleaning fluids, alcohol and other solvents.
c.
Non-anodised aluminium is susceptible to flash oxidation.
d.
Baking temperature ranges between 300°C to 360°C.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
_____ is a pictorial image or symbol that represents an idea or concept.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
One of the following is not an advantage for photopolymer system.
a.
Sensitive to many UV and visible wavelengths.
b.
Susceptibility to oxygen quenching.
c.
Low molecular weight monomers are water soluble.
d.
Simplified photoenergy requirements.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The minimum diameter of a Frequency Modulated (FM) screening dot, recommended for offset printing, on coated paper in premier quality is:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Which of the following indicates the right sequence in photopolymerization reaction?
a.
Initiation, Radical generation, Propagation, Termination
b.
Radical generation, Initiation, Propagation, Termination
c.
Initiation, Oxygen inhibition, Propagation, Termination
d.
Radical generation, Oxygen inhibition, Propagation, Termination
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
_____ is a perceptual colour model and used for visualization of colour attributes and relationships.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
One of the following is not a probable cause for washing off fine dots in flexographic photopolymer plate is:
a.
Not enough face exposure
b.
Not enough back exposure
d.
Not enough post exposure
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
One of the following is not a cause for reduction in print density values when measuring with densitometers having correct viewing geometry.
a.
Unidirectional surface reflectance
b.
Multidirectional surface reflectance
c.
Total internal reflectance
d.
Multiple internal reflectance
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Loss in colour intensity due to double-transfer principle of offset inks necessitates:
a.
High pigment concentration
b.
High impression pressure
c.
High ink film thickness
d.
Less dampening solution
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
_____ is the special character used over the second of two vowels in a word to show that they are to be sounded separately.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Formula for calculating change in print length resulting from a packing change is: Where D = change in length, P = packing change, C = % of circumference occupied image
a.
$\frac{P\pi C}{100} = D$
b.
$\frac{2P\pi C}{100} = D$
c.
$\frac{4P\pi C}{100} = D$
d.
$\frac{P}{2} \times \frac{\pi C}{100} = D$
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
_____ is the adjustment of space so that one part of a letter extends over the body of another.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
If a densitometer has a measured value of 100 light units. On placing it on print control patch and 10 units of light is reflected to the photocell. What is the optical density?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In an Integral tripack emulsion, the top layer is:
b.
Green-sensitive emulsion
c.
Red-sensitive emulsion
d.
Blue-sensitive emulsion
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Polyurethane squeegee blades are made and supplied in a wide range of grades and are colour coded. Match the following with reference to Hardness and colour code.
a.
(i)-(2); (ii)-(1); (iii)-(4); (iv)-(3)
b.
(i)-(4); (ii)-(3); (iii)-(1); (iv)-(2)
c.
(i)-(3); (ii)-(2); (iii)-(4); (iv)-(1)
d.
(i)-(1); (ii)-(3); (iii)-(2); (iv)-(4)
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
_____ technique removes primary colours in deep shadow areas and replace them with black.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A type of binding carried out for receipt books, bill books, cheque books etc. in cheap cost with the help of machines and also has numbering and perforation is known as
c.
General and office stationery binding
d.
Exercise note book binding
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Moire patterns occur when screen angles are not set with accuracy of:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The operation "Treatment of Plates" involved in production of book-binding is categorised under:
b.
Pre-forwarding operations
c.
Physical parts of book
d.
Preparation for printing
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Trapping and imposition functions can also take place in the RIP in:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
__________ is a process of producing raised images / raised printing through the application of powder and heat.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In electrophotography, the light wavelength when using LED system is in the range of:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In a Guillotine cutter, the device used to hold a stack of paper and to position it in the desired position on the bed is known as:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
While expressing degree of wetting of a solid surface by a liquid, the contact angle is equal to zero, then there is:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Paper manufacturing machine was invented by ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The surface of the gravure cylinder between wells and the doctor blade rises against it to scrape ink from cylinder is known as ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Multiply paper and board is produced using ________ machine.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Which of the following gravure cylinder preparation method uses a 'diamond stylus tool' that cuts into the surface of the gravure cylinder?
a.
Diffusion-etch process
c.
Direct-transfer process
d.
Electromechanical process
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Increasing the beating time of wood pulp results in the decrease of ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Which one of the following plate (image carrier) is known as 'factory coated plates'?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Filaments of ink deposited on top of the previously printed layer due to the formation of ink strings formed during film splitting is called ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Pre-sensitised plastic coated plates were originated in ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The current industry standard instruments, for caliper test, may it be spring loaded or dead weight in action, apply a pressure of _____ lbs. Over an area of 0.25 in².
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
When was stickyback developed to attach photo-polymers to plate cylinder in flexographic printing process?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The Tensile Strength of Nylon at break (psi) is _____.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
For preparation of photographic stencil, which of the following medium is used for image generation in direct image method?
a.
through a transparent negative
b.
through a transparent positive
c.
through a opaque negative
d.
through a opaque positive
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Identify "Caprolactam" which is a synthetic polymer:
b.
n (structure as printed in the paper)
c.
n (polyamide ring structure as printed in the paper)
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Which one of the following is true in context to three-roll ink system of Flexography printing process?
a.
Fountain roller speed is kept constant.
b.
Anilox roll speed is kept constant.
c.
Doctor blade is used to remove excess ink from the anilox roll.
d.
No fountain roll is used in three-roll ink system.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
"Dunnage" is a function performed by which one of the following?
b.
Creped Cellulose Wadding
c.
Corrugated fiber board
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In CTP (Computer To Plate), thermal conversion plates are coated with a reactive material that undergoes a conversion process when exposed to:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
What is the safety stock required if annual demand is 1000 units, ordering cost is ₹10 per order, carrying cost is ₹10 per unit-year and stock out costs are ₹40 each?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
For CTP (Computer To Plate), thermal lasers range from:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Inventory costs which include the interest on invested capital, handling and storage costs and insurance is called:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Copper is a metal which can be termed as:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In inventory management, ordering the exact amount of the net requirements in each period is called as ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Whenever it is necessary to 'trip' an offset machine either because of faulty sheet feeding or immediately prior to stopping, the printing cylinders are moved out of contact by blanket cylinder:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The period used for planning purposes in Materials Requirement Planning (MRP) is called ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Offset blanket should be wrapped around the cylinder in its:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
When was the first News-paper published from our country (India)?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The relationship between force and stretch of paper is called:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In publishing process, 'Content acquisition' is performed by whom?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Conductivity of dampening solution are measured in:
a.
millivolts/ centimeter
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Find the age group (Children Publishing) for which books published are called "Novelty Books"?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Several folds made parallel to each other is:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The technical means of controlling usage of digitally available books or journals is called ________.
a.
Digital Reference Management
b.
Digital Records Management
c.
Digital Receipt Management
d.
Digital Rights Management
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
_____ printing enables high-quality and consistent reproduction of the finest photographic details in even the smallest of images on thin and flexible printing material and a large number of multiple-ups:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Theoretically, as the film weight is doubled, so is the percentage absorption; the reflectance is halved and the density increases by:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A charge transport layer is a part of:
a.
Organic photoconductor
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
If excessively high film thicknesses are transferred to the image areas, the amount of dot gain arising through increased ink squash:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Partial transfer of the already printed image section into another image area is:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Offset press condition in which non-image areas of plate accept ink is called:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Half-size format in newspaper printing is called:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
From density measurements, which equation is used to calculate dot area:
a.
Charles Thomas equation
c.
Murray - Davies equation
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The trimmed/finished size of a visiting card is ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The cutting marks provided at the sides of the illustration to guide binder to flush cut the plates to be tipped-on is termed as ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The process of checking the gathered section to ensure that gathered formes are in correct sequence is called ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
When the total number of formes/sections are arranged on top of each other in sequence, finally to make one complete book is termed as ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Which of the following is a constituent part of a book?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Identify the process of book binding, in which, two or three thick cotton cords are placed on the spine of the book to accommodate the thickness of cords. Threads are covered over the cords during sewing process?
d.
Double flexible sewing
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Vellum, a type of leather used as book binder's material is obtained from________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
When male and female dies (engraving on metal) are used to make impressions without foil or ink, the process is known as ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Steel block in which image is deeply engraved for die stamping and hollow steel die with a sharpened edge for cutting and creasing is called ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In the process of edge decoration, name the process in which, after gilding, solid gilt edges are cut into different patterns harmonizing with the finishing works on the cover and is done with small hot tools?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Fibres suitable for paper making are usually extracted from ________ tissue.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
'Printing Cushion' is an important property to be considered for which of the following printing methods?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The increase of ________ of paper results in the increase of ink consumption.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
For coating papers ________ is used as an adhesive binder.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The spent liquor containing non fibrous wood component is called as ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Irregular acceptance of ink into the surface of the paper is called as ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Azo pigments are used for the preparation of ________ colour inks.
d.
both magenta and yellow
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Small pigment crystal size produces ________.
a.
Low transparency and low colour strength
b.
Low transparency and high colour strength
c.
High transparency and low colour strength
d.
High transparency and high colour strength
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Dyes that are insoluble in water and are used as colloidal aqueous solution is called ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Which of the following equation is used to calculate ink trapping in multi colour printing process?
a.
$\left(\dfrac{\text{density of first printed colour} - \text{density of over print colour}}{\text{density of second print colour}}\right) \times 100$
b.
$\left(\dfrac{\text{density of second print colour} - \text{density of first print colour}}{\text{density of over print colour}}\right) \times 100$
c.
$\left(\dfrac{\text{density of over print colour} - \text{density of first print colour}}{\text{density of second print colour}}\right) \times 100$
d.
$\left(\dfrac{\text{density of first print colour} - \text{density of second print colour}}{\text{density of varnish}}\right) \times 100$
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Which one of the following has highest tensile strength at break (psi)?
c.
Poly Vinyl Chloride (P.V.C.)
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Moisture barrier value of EVOH i.e. Ethylene Vinyl Alcohol is ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Effect of sun light on 'L.D.P.E.' i.e. 'Low Density Poly Ethylene' is that :
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
"HygroScopicity" is an indication of:
a.
Uniform behaviour of cushioning material under water.
b.
Uniform behaviour of spacer material under water.
c.
Uniform behaviour of printing material under water.
d.
Uniform behaviour of film under water.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Cushion factor provided by "Rubber-Closed Cell Expanded rubber" of density 12-14 lb/ft³ is ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Which one of the following is a Non-resilient Cushioning material?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
If 0.01 mm aluminium foil holds good for biscuit packaging in the form of laminate, then what is the preference gauge change in strip packaging?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
While performing "Fungus Resistance Test" of a packaging material, the test specimen has to be exposed to humidity and temperature for ________ days.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Which one of the following materials is 'NOT' used in Blister Packaging?
d.
Cellulose Acetate Butyrate
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
While performing salt spray test, the package is exposed to a wet and dense fog containing Sodium Chloride (NaCl) for a period of ________ hours.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Forecast price of material + Actual price of material is called ________.
a.
Material Accuracy Index
b.
Forecast Accuracy Index
d.
Discount Accuracy Index
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Value of non moving items in an inventory ÷ Total inventory value is equal to:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
(Profit + Sales) × (Sales ÷ (Fixed Assets + Current Assets)) =
b.
Economic Order Quantity
c.
Profitability Analysis
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Depreciation allowances and unpaid interest of the owner's own fund are the examples of ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A series of receipts or payments of a fixed amount for a specified number of years is called ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
If A = Average number of random arrivals per unit of time, S = Average number of services provided per channel per unit of time, M = Number of available channels, then utilization factor of the system is:
a.
$\dfrac{M \times S}{A}$
b.
$\dfrac{A}{M \times S}$
d.
$\dfrac{S \times A}{M}$
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A ________ pricing strategy would use a low price to gain market share.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
________ segmentation divides the market by psychological differences.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In Inventory Management JIT represents:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In Costing WACC represents:
a.
Weighted Average Cost of Capital
b.
Weighted Accounting Cost of Capital
c.
Weighted Average Cost of Capacity
d.
Working Average Cost of Capital
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
"To publish" is commonly defined as ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The publishing of referred or peer-reviewed learned articles sold on subscription to libraries are called ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The right hand facing page of a book is known as ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In publishing industry, a "Blurb" is:
a.
Usually printed on the front flap of the jacket of a hard book
b.
Usually printed after the 'Acknowledgement' page
c.
Usually printed on the footer, on index page
d.
Usually printed on the end of each chapter page
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In book publishing ________ facilitates the exchange of data between computer systems, saving trade partner's time, errors and cost by avoiding the use and handling of paper.
a.
Electronic Data Interchange
b.
Electronic Data Intermediater
c.
Electronic Data Interpretation
d.
Electronic Data Interface
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The alternative to a translation deal, which is used for many highly illustrated colour books and children books, the supply of digital files of their translations to fit around the four-colour illustration is called ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Publication by arrangement between two companies, which could mean the use of both imprints and dividing the profits on title is called ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
________ is an error introduced in key boarding a text, also called typo.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
________ are the links on a web page that enable the user to retrace their route back through the site.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In publishing industry, 'Folio' is referred to:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Quality in the ________ is judged primarily on ability to transfer ink from plate to substrate consistently and without defects while complying with certain technical specifications.
a.
Production printing area
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
What consists of fine positive and negative lines, the finest of which is 4 µm and the thickest 70 µm?
b.
Process Character Wedge
c.
Plate Control Wedge (PCW)
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The quality control strip is stripped and plated to print :
a.
bisecting the gripper edge
b.
parallel to the gripper edge
c.
in the middle of the sheet
d.
on the backside of the sheet
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The slur gauge consists of fine horizontal lines that form the word SLUR on:
a.
A vertical line background
b.
A circular line background
c.
A diagonal line background
d.
Zig-Zag line background
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The capability to assess trapping is provided by a solid area of each of the :
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
For light transmission, the optical density D is defined in terms of the transmittance T as:
a.
$D=\log_{10}\frac{1}{T}$
d.
$D=\log_{10}\frac{1}{\sqrt{T}}$
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The increase in dot size comprises two important different components namely :
b.
Diagonal misregistration and set-off
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
If, (Q) represents 'Quality', (P) represents 'Performance' and (E) represents 'Expectations'; Quality can be quantified as follows:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
What represents India in ISO ?
a.
Batch of Indian Sections (BIS)
b.
Bureau of Indian Standards (BIS)
c.
Batch of Internal Solutions (BIS)
d.
Branch of Indian Sections (BIS)
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
An enlargement of dot size to areas that are greater than those required in order to reproduce the tonal values of the original is called :
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
What will be ratio compounded of the 3 ratios $2:3$, $6:11$ and $11:2$?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Who is called as 'the Master of the Seven notes of Music'?
a.
Pandiya Nedunchezhiyan
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Impulse is expressed ________.
c.
$\dfrac{Momentum}{Time}$
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Which one of the following is a Vat dye ?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A concentric arrangement of bundle sheath cells of the leaves of C-4 plants is called ________.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Who organised green turbaned peasants agitation in 1972 ?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Who was the First Nayak Ruler of Madurai?
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Annie Besant established the Home Rule League at:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
'Fathom' is a unit to measure the:
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In which Tamil literature, the word 'Sangam' is used?
d.
Iraiyanar Ahapporul Urai
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
