A carbon resistor of (47 ± 4.7) kΩ is to be marked with rings of different colours for its identification. The colour code sequence will be
a.
Green – Orange – Violet – Gold
Correct Answer
b.
Yellow – Green – Violet – Gold
c.
Yellow – Violet – Orange – Silver
d.
Violet – Yellow – Orange – Silver
Step-by-Step AI Explanation
Verified Method
47 kΩ = 47 × 10^3 Ω, so the first two digits are 4 and 7 (Yellow, Violet), multiplier 10^3 (Orange), with 10% tolerance (Silver) or 5% (Gold). Since ±4.7 kΩ is 10%, the correct tolerance is Silver; however the options suggest the intended resistor is 47 kΩ with 10% tolerance, and the digit sequence should be Yellow-Violet-Orange-Silver. The OCR likely distorted the statement; among listed options, the standard code for 47 kΩ, 5% would be Yellow-Violet-Orange-Gold. Based on the given choices, option (a) corresponds to 57 kΩ, not 47 kΩ, indicating the source is inconsistent.
Q92mcq
A set of n equal resistors, of value R each, are connected in series to a battery of emf E and internal resistance R. The current drawn is I. Now, the n resistors are connected in parallel to the same battery. Then the current drawn from battery becomes 10I. The value of n is
a.
9
b.
20
c.
11
d.
10
Correct Answer
Step-by-Step AI Explanation
Verified Method
Series current I = E / ((n+1)R). In parallel, equivalent resistance is R/n, so current = E / (R + R/n) = En / ((n+1)R). Given this is 10I, we get n = 10.
Q94mcq
The power radiated by a black body is P and it radiates maximum energy at wavelength λ0. If the temperature of the black body is now changed so that it radiates maximum energy at wavelength (4/3)λ0, the power radiated by it becomes nP. The value of n is
a.
256/81
b.
81/256
Correct Answer
c.
3/4
d.
4/3
Step-by-Step AI Explanation
Verified Method
By Wien's law, λmax ∝ 1/T, so T2/T1 = λ1/λ2 = 3/4. By Stefan-Boltzmann law, P ∝ T^4, hence n = (3/4)^4 = 81/256.
Q95mcq
Two wires are made of the same material and have the same volume. The first wire has cross-sectional area A and the second wire has cross-sectional area 3A. If the length of the first wire is increased by Δl on applying a force F, how much force is needed to stretch the second wire by the same amount?
a.
F
b.
4F
c.
6F
d.
9F
Correct Answer
Step-by-Step AI Explanation
Verified Method
For same material and same elongation, F = Y A Δl / L. Since volumes are equal, AL is constant, so L2 = L1/3 when A2 = 3A. Therefore F2 = Y(3A)Δl/(L1/3) = 9F.
Q96mcq
A sample of 0.1 g of water at 100°C and normal pressure (1.013 × 10^5 N m−2) requires 54 cal of heat energy to convert to steam at 100°C. If the volume of the steam produced is 167.1 cc, the change in internal energy of the sample is
a.
84.5 J
b.
42.2 J
Correct Answer
c.
208.7 J
d.
104.3 J
Step-by-Step AI Explanation
Verified Method
Use ΔU = Q − W. Here Q = 54 cal ≈ 54 × 4.2 = 226.8 J. Work done W = PΔV = 1.013×10^5 × 167.1×10^-6 ≈ 16.9 J. So ΔU ≈ 226.8 − 16.9 = 209.9 J? But note 0.1 g water at 100°C to steam at 100°C should use Q = 54 cal for 0.1 g, giving 226.8 J. The printed options indicate the intended conversion likely uses 54 cal = 226.8 J and W ≈ 184.6 J? Rechecking: 167.1 cc is the steam volume, initial liquid volume is negligible; W = 1.013×10^5 × 167.1×10^-6 ≈ 16.9 J. Thus ΔU ≈ 209.9 J, matching option (3) 208.7 J within rounding.
Q97mcq
A small sphere of radius r falls from rest in a viscous liquid. As a result, heat is produced due to viscous force. The rate of production of heat when the sphere attains its terminal velocity is proportional to
a.
r^4
b.
r^5
Correct Answer
c.
r^2
d.
r^3
Step-by-Step AI Explanation
Verified Method
At terminal velocity, viscous drag balances effective weight, so v_t ∝ r^2 (Stokes' law). Heat production rate equals drag × velocity ∝ r × v_t × r? More directly, drag ∝ r v_t and v_t ∝ r^2, hence power ∝ r^3? However for a sphere, drag = 6πηrv_t and v_t ∝ r^2, so power = 6πηr v_t^2 ∝ r × r^4 = r^5. Therefore the correct proportionality is r^5.
Q98mcq
The moment of the force F = 4i + 5j − 6k at (2, 0, −3), about the point (2, −2, −2), is given by
a.
−7i − 4j − 8k
Correct Answer
b.
−7i − 8j − 4k
c.
−4i − j − 8k
d.
−8i − 4j − 7k
Step-by-Step AI Explanation
Verified Method
Position vector from (2, −2, −2) to (2, 0, −3) is r = (0, 2, −1). Moment = r × F = |i j k; 0 2 −1; 4 5 −6| = (−7)i − (−? actually) = −7i − 4j − 8k.
Q99mcq
A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular scale division coincides with 25 divisions above the reference level. If screw gauge has a zero error of −0.004 cm, the correct diameter of the ball is
a.
0.529 cm
b.
0.053 cm
c.
0.525 cm
Correct Answer
d.
0.521 cm
Step-by-Step AI Explanation
Verified Method
Observed reading = MSR + CSR×LC = 5 mm + 25×0.001 cm = 0.5 cm + 0.025 cm = 0.525 cm. Zero error = −0.004 cm means zero correction = +0.004 cm. Correct diameter = 0.525 + 0.004 = 0.529 cm? But the options and standard screw gauge convention usually take observed = 0.525 cm and correct = observed − zero error = 0.525 − (−0.004) = 0.529 cm. Since 0.529 cm is option (1), it is the correct answer.
Q100mcq
A toy car with charge q moves on a frictionless horizontal plane surface under the influence of a uniform electric field E. Due to the force qE its velocity increases from 0 to 6 m/s in one second duration. At that instant the direction of the field is reversed. The car continues to move for two more seconds under the influence of this field. The average velocity and the average speed of the toy car between 0 to 3 seconds are respectively
a.
1.5 m/s, 3 m/s
b.
1 m/s, 3.5 m/s
c.
1 m/s, 3 m/s
Correct Answer
d.
2 m/s, 4 m/s
Step-by-Step AI Explanation
Verified Method
Uniform acceleration in first second: a = 6 m/s^2. After 1 s, velocity is 6 m/s. Field reverses, so acceleration becomes −6 m/s^2 for next 2 s. The car stops after 1 s and then moves back for 1 s, ending at rest. Net displacement = area under v–t graph = triangle 0–1 s (3 m) minus triangle 2–3 s (3 m) = 0? Actually from 1 to 2 s, it travels forward 3 m and from 2 to 3 s backward 3 m, so displacement is 3 m. Total distance = 3 + 3 + 0? The correct kinematics gives average velocity = 3/3 = 1 m/s and average speed = 9/3 = 3 m/s.
Q101mcq
A block of mass m is placed on a smooth inclined wedge ABC of inclination θ as shown in the figure. The wedge is given an acceleration a towards the right. The relation between a and θ for the block to remain stationary on the wedge is
a.
a = g tan θ
Correct Answer
b.
a = g cos θ
c.
a = g/sin θ
d.
a = g/ cos θ
Step-by-Step AI Explanation
Verified Method
In the wedge frame, the pseudo force ma acts leftward. For the block to stay at rest relative to the incline, the component along the plane must balance: ma cos θ = mg sin θ, giving a = g tan θ.
🎉 10 Free Sample Solutions Completed
Unlock All 51 Questions & Solutions
Sign up free in seconds to unlock step-by-step AI answers for the remaining 41 questions.
An em wave is propagating in a medium with a velocity V = V i. The instantaneous oscillating electric field of this em wave is along +y axis. Then the direction of oscillating magnetic field of the em wave will be along
a.
−x direction
b.
−y direction
c.
+z direction
d.
−z direction
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The refractive index of the material of a prism is 2 and the angle of the prism is 30°. One of the two refracting surfaces of the prism is made a mirror inwards, by silver coating. A beam of monochromatic light entering the prism from the other face will retrace its path (after reflection from the silvered surface) if its angle of incidence on the prism is
a.
zero
b.
30°
c.
45°
d.
60°
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
An object is placed at a distance of 40 cm from a concave mirror of focal length 15 cm. If the object is displaced through a distance of 20 cm towards the mirror, the displacement of the image will be
a.
36 cm towards the mirror
b.
30 cm towards the mirror
c.
36 cm away from the mirror
d.
30 cm away from the mirror
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
An object is placed at a distance of 40 cm from a concave mirror of focal length 15 cm. If the object is displaced through a distance of 20 cm towards the mirror, the displacement of the image will be
a.
36 cm towards the mirror
b.
30 cm towards the mirror
c.
36 cm away from the mirror
d.
30 cm away from the mirror
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
An electron of mass m with an initial velocity V = V0 î (V0 > 0) enters an electric field E = -E0 î (E0 = constant > 0) at t = 0. If λ0 is its de-Broglie wavelength initially, then its de-Broglie wavelength at time t is
a.
λ0
b.
λ0 t
c.
λ0 (1 + eE0 t / (mV0))
d.
λ0 / (1 + eE0 t / (mV0))
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
When the light of frequency 2ν0 (where ν0 is threshold frequency), is incident on a metal plate, the maximum velocity of electrons emitted is v1. When the frequency of the incident radiation is increased to 5ν0, the maximum velocity of electrons emitted from the same plate is v2. The ratio of v1 to v2 is
a.
2 : 1
b.
4 : 1
c.
1 : 4
d.
1 : 2
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
For a radioactive material, half-life is 10 minutes. If initially there are 600 number of nuclei, the time taken (in minutes) for the disintegration of 450 nuclei is
a.
15
b.
30
c.
10
d.
20
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The fundamental frequency in an open organ pipe is equal to the third harmonic of a closed organ pipe. If the length of the closed organ pipe is 20 cm, the length of the open organ pipe is
a.
16 cm
b.
12.5 cm
c.
8 cm
d.
13.2 cm
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
At what temperature will the rms speed of oxygen molecules become just sufficient for escaping from the Earth’s atmosphere? Given: Mass of oxygen molecule m = 2.76 × 10^-26 kg, Boltzmann’s constant k_B = 1.38 × 10^-23 J K^-1
a.
1.254 × 10^4 K
b.
5.016 × 10^4 K
c.
8.360 × 10^4 K
d.
2.508 × 10^4 K
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Unpolarised light is incident from air on a plane surface of a material of refractive index μ. At a particular angle of incidence i, it is found that the reflected and refracted rays are perpendicular to each other. Which of the following options is correct for this situation?
a.
i = tan^-1(1/μ)
b.
i = sin^-1(1/μ)
c.
Reflected light is polarised with its electric vector perpendicular to the plane of incidence
d.
Reflected light is polarised with its electric vector parallel to the plane of incidence
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
In Young’s double slit experiment the separation d between the slits is 2 mm, the wavelength λ of the light used is 5896 Å and distance D between the screen and slits is 100 cm. It is found that the angular width of the fringes is 0.20°. To increase the fringe angular width to 0.21° (with same λ and D) the separation between the slits needs to be changed to
a.
1.7 mm
b.
2.1 mm
c.
1.9 mm
d.
1.8 mm
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A metallic rod of mass per unit length 0.5 kg m−1 is lying horizontally on a smooth inclined plane which makes an angle of 30° with the horizontal. The rod is not allowed to slide down by flowing a current through it when a magnetic field of induction 0.25 T is acting on it in the vertical direction. The current flowing in the rod to keep it stationary is
a.
11.32 A
b.
14.76 A
c.
5.98 A
d.
7.14 A
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
An inductor 20 mH, a capacitor 100 μF and a resistor 50 Ω are connected in series across a source of emf, V = 10 sin 314 t. The power loss in the circuit is
a.
1.13 W
b.
2.74 W
c.
0.43 W
d.
0.79 W
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A thin diamagnetic rod is placed vertically between the poles of an electromagnet. When the current in the electromagnet is switched on, then the diamagnetic rod is pushed up, out of the horizontal magnetic field. Hence the rod gains gravitational potential energy. The work required to do this comes from
a.
the induced electric field due to the changing magnetic field
b.
the lattice structure of the material of the rod
c.
the magnetic field
d.
the current source
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Current sensitivity of a moving coil galvanometer is 5 div/mA and its voltage sensitivity (angular deflection per unit voltage applied) is 20 div/V. The resistance of the galvanometer is
a.
500 Ω
b.
250 Ω
c.
25 Ω
d.
40 Ω
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A tuning fork is used to produce resonance in a glass tube. The length of the air column in this tube can be adjusted by a variable piston. At room temperature of 27°C two successive resonances are produced at 20 cm and 73 cm of column length. If the frequency of the tuning fork is 320 Hz, the velocity of sound in air at 27°C is
a.
300 m/s
b.
350 m/s
c.
339 m/s
d.
330 m/s
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A pendulum is hung from the roof of a sufficiently high building and is moving freely to and fro like a simple harmonic oscillator. The acceleration of the bob of the pendulum is 20 m/s² at a distance of 5 m from the mean position. The time period of oscillation is
a.
1 s
b.
2 s
c.
π s
d.
2π s
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
An electron falls from rest through a vertical distance h in a uniform and vertically upward directed electric field E. The direction of electric field is now reversed, keeping its magnitude the same. A proton is allowed to fall from rest in it through the same vertical distance h. The time of fall of the electron, in comparison to the time of fall of the proton is
a.
equal
b.
10 times greater
c.
5 times greater
d.
smaller
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The kinetic energies of a planet in an elliptical orbit about the Sun, at positions A, B and C are K_A, K_B and K_C, respectively. AC is the major axis and SB is perpendicular to AC at the position of the Sun S as shown in the figure. Then
a.
K_B > K_A > K_C
b.
K_B < K_A < K_C
c.
K_A > K_B > K_C
d.
K_A < K_B < K_C
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
The kinetic energies of a planet in an elliptical orbit about the Sun, at positions A, B and C are K_A, K_B and K_C, respectively. AC is the major axis and SB is perpendicular to AC at the position of the Sun S as shown in the figure. Then
a.
K_B > K_A > K_C
b.
K_B < K_A < K_C
c.
K_A > K_B > K_C
d.
K_A < K_B < K_C
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A solid sphere is in rolling motion. In rolling motion a body possesses translational kinetic energy (K_t) as well as rotational kinetic energy (K_r) simultaneously. The ratio K_t : (K_t + K_r) for the sphere is
a.
2 : 5
b.
10 : 7
c.
5 : 7
d.
7 : 10
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A solid sphere is in rolling motion. In rolling motion a body possesses translational kinetic energy (K_t) as well as rotational kinetic energy (K_r) simultaneously. The ratio K_t : (K_t + K_r) for the sphere is
a.
2 : 5
b.
10 : 7
c.
5 : 7
d.
7 : 10
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
If the mass of the Sun were ten times smaller and the universal gravitational constant were ten times larger in magnitude, which of the following is not correct ?
a.
‘g’ on the Earth will not change.
b.
Time period of a simple pendulum on the Earth would decrease.
c.
Walking on the ground would become more difficult.
d.
Raindrops will fall faster.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
If the mass of the Sun were ten times smaller and the universal gravitational constant were ten times larger in magnitude, which of the following is not correct?
a.
'g' on the Earth will not change.
b.
Time period of a simple pendulum on the Earth would decrease.
c.
Walking on the ground would become more difficult.
d.
Raindrops will fall faster.
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A solid sphere is rotating freely about its symmetry axis in free space. The radius of the sphere is increased keeping its mass same. Which of the following physical quantities would remain constant for the sphere?
a.
Angular momentum
b.
Rotational kinetic energy
c.
Moment of inertia
d.
Angular velocity
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A body initially at rest and sliding along a frictionless track from a height h (as shown in the figure) just completes a vertical circle of diameter AB = D. The height h is equal to
a.
4/5 D
b.
5/7 D
c.
D
d.
2/3 D
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Three objects, A: a solid sphere, B: a thin circular disk and C: a circular ring, each have the same mass M and radius R. They all spin with the same angular speed ω about their own symmetry axes. The amounts of work (W) required to bring them to rest would satisfy the relation
a.
W_A > W_C > W_B
b.
W_B > W_A > W_C
c.
W_A > W_B > W_C
d.
W_C > W_B > W_A
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
A moving block having mass m collides with another stationary block having mass 4m. The lighter block comes to rest after collision. When the initial velocity of the lighter block is v, then the value of coefficient of restitution e will be
a.
0.4
b.
0.8
c.
0.25
d.
0.5
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Given van der Waals constant for NH3, H2, O2 and CO2 are respectively 4.17, 0.244, 1.36 and 3.59, which one of the following gases is most easily liquefied?
a.
CO2
b.
O2
c.
H2
d.
NH3
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
Iron exhibits bcc structure at room temperature. Above 900°C, it transforms to fcc structure. The ratio of density of iron at room temperature to that at 900°C (assuming molar mass and atomic radii of iron remains constant with temperature) is:
a.
2/1
b.
24/33
c.
23/34
d.
2/3
Correct Answer & Step-by-Step Solution Locked
Sign in free to reveal the correct answer and AI explanation for this question.
